How To Shoot With a Bipod – The Ultimate Pro-Backed Guide. Only a well-balanced rest could produce the perfect rifle shot. A bipod is like an asset for the shooters in the field as it could create that balanced position of your rifle. It becomes a part of your rifle if you attach it and placing it on a hard ground would allow the rifle to recoil easily and freely. The accuracy to shoot with a bipod depends on the position of its legs. You should minimize the flex by keeping the bipod’s legs low as much as possible to the ground and check the settings properly if your bipod is ready to shoot or not.
Bipods are used on many weapons because of its usefulness. You could get benefits from it if you would be able to use it in a proper way. At first glance, it may seem easy to shoot with a bipod but after proper knowledge you may think that it is not as easy as you thought. Here are the details of how to shoot with a bipod.
- Install properly:
Your time and efforts would be a waste if you don’t install the bipod with your rifle properly. This is the main step and you need to complete this much carefully and correctly. All the major issues that the shooters find while shooting is involved with improper installation like mounting it backward or too far toward the rear or tightening down too much.
It is also important to install a bipod the right way since a small mistake could make your shooting a difficult one. you should follow the instructions that come with your bipod and make sure that is tight and nice.
- Sling or rail swivel mount:
There are two kinds of bipods- one that connects to Picatinny rails and another that connects to the sling swivel studs. Both types of bipods are stable and secure platforms but swivel studs appear to be a dominant option for shooters. Though two of them are much similar but different adapters allow you to use different bipods for different setups.
For rocking the M-LOK rail, you could use sling swivel studs but there are also options to use key Mod and picatinny rails. You could turn the sling swivel studs into a picatinny rail if you’re rocking with no swivel and no rails rifle.
In this age, everything is possible with developed techniques. Moreover, you should consider the adapter installation as well. Ensure that you have installed it tight and right. You may not want slack on the adapter as it causes slack in your bipod that could slack in the shooting.
- Choose a position:
Another important fact is to choose a right position where you would set up your bipod. A hard ground would not be suitable for this type of shooting. It makes your gun hop, twist and rock-n-roll. You should stay away from the hard grounds even if they appear so inviting. You would need to choose a place where your bipod could dig into like softer dirt. Hard dirt is difficult to dig for the legs to make a stable place and it requires much time. Thus, it is better to look for a suitable, softer dirt.
- Load the bipod:
Normally, people load rifles but loading bipods and rifles together would get you the best act. You may find it a bit difficult to load a bipod. You have to put pressure on the bipod that results in stability. You should take out the slack of the accessory which connects the rifle to the surface.
The reason is simple – the bipod cannot really help in reducing the recoil that actually depends on the shooter. The absence of loading could cause erratically moving of the rifle and bipod. Your bipod would act like a pivot without pressure behind it. the recoil would cause the bipod to move to one side. Don’t let bipods hop up as they are not rabbits!
It is important for action or urban shooting and flat surfaces would not work while shooting in odd positions or angles. You need to control your rifle then.
How to load your bipod?
You should apply a little pressure when loading it and pressurize it using the firing shoulder. You have to understand the difference between not enough and too much. Too much force may shove the bipod forward. If you’re moving the bipod and rifle physically, just take a breath and put a little pressure. different weapons require different pressure but you would not groove if it is moving. You should apply more pressure if you find your rifle sliding or jumping backwards. The rifle is not going to control you but you need to control the rifle by putting enough pressure.
There are two ways of loading a bipod- the cobra method and the toes method. Both of the methods are effective. After you get the prone position, the toes method would start. Bring the rifle up to the shoulder and get other fundamentals down. You just have to level out both your feet and put pressure forward by pushing your body through your toes.
On the other side, you would need to get a cobra position like you do in yoga for the cobra method. You should lift up the upper body from the surface by pulling your rifle to the firing shoulder. After that, you have to put yourself a little lower into that prone firing position. Meanwhile you pull your rifle back, stretch forward it and the rifle would be under some pressure at your bipods that ensures its proper set. It may take some practice to catch the process correctly.
- Follow through:
Follow through is not so easy but critical as most of the people forget almost about the follow through. Many people drop their rifle as soon as they make a shot and rush to the spot where they shoot. They exclude the idea to see the sight picture after every shot. You should re-examine the sight picture after each shot.
You have to make sure that your sight pictures aren’t moving between shots drastically. The bipod might move after firing the sights and so, you should check the bipod’s load. Stay behind the rifle after taking your shot and watch till the sights become stable. You should wait about a few seconds more.
- Choose the right bipod:
There are many options for you available in the market for choosing a bipod. There are not any rules to choose one. you could buy one according to your budget. For your help, I am describing some of the things that you should remember when getting one.
UTG heavy duty bipods offer good quality bipods. they extend from 6.69-9.12 inches and you could adjust the legs of the bipods over 5 positions. You could easily fold these bipods backwards or forwards when they are not in use. They are affordable and easily mounted on the rifles.
The Atlas bipods are also popular because of their extreme reliability and tight tolerance. They could be extended from 4.75-9 inches and mounted with any type of pic rails. Moreover, another type of bipods is the Harris bipods. They are suitable for military units as they are effective, lightweight makes it easy to use.
Bipods are ingenious and simple to work with for steadying the rifle and reduces the amount of errors. If you are going to shoot in the horizontal area, you should have a bipod with your rifle to gain accuracy.
