A Blue death screen is one of the most delicate things that can happen with the Windows Operating System when you are getting SYSTEM THREAD EXCEPTION NOT HANDLED post. Mainly because of a driver fault, this error occurs. Your system will show this message by an old, damaged, or incompatible conductor. If this problem has been triggered by a newly installed software or driver, then the first step should be to uninstall it as it is not compatible, keep track of updates and try to reinstall when a patch or driver update is released.
Often, it can patch itself immediately, reset the whole Windows operating system, and usually start Applications, but most of the time, it doesn’t. There will show a blue screen error permanently, or you will see a restart loop. The loop will begin with an error message and stop code from a blue screen. Then your computer restarts attempts to run Windows OS, and the blue screen is seen appears again. Repeat. !
Table of Contents
Finding the BSOD Cause
Although unusual, it should also be noted that hardware problems can cause this crash (and not just software problems) – usually memory (RAM) problems. The solution can be as easy as re-sitting a part in your machine, however, if you are not 100% sure what you are doing you should not touch the internal hardware of your device. These problems can also be very difficult to identify and must be solved by an expert.
However, because this BSOD is normally triggered by the driver and other system data, its focus is on file repair. Before you start to adjust things, you always start to check the software.
The first step is to detect the problem file. If the crash occurs any time you attempt to boot Windows then make sure you write down the file name when you see it after your computer has started. If it appears to happen at random or while running such programs and you don’t know or don’t write down the file name, this information can be accessed without getting Windows crashing again. Please keep reading on.
Solutions:
1: Enter safe Mode
2: Uninstall your graphics driver
3: Update Drivers
4: Check for Faulty Files
5: Run SFC Command
6: Uninstall some third-party software
Solution 1: Restart Safe Mode
Untreated device thread exception can cause Windows 10 to fail to start and function as usual. In this case, it will be easier for you to enter the safe mode to boot up and then address the system thread exception on Windows 10 which is not handled by BSOD.
Normally, if you can start your computer, there’s no need to switch into safe mode until you follow the steps below.
Solution 2: Uninstall the Graphics Driver
Any BSOD-related problem, such as device thread exception not handled, has something to do with NVIDIA or Intel driver such as the Graphics Card driver. As your adapter drivers are defective, you can have your Computer running this Blue Death Error Screen.
- Go to the Device Manager.
- Pinpoint Display Adapter and right-click Uninstall Device on the Graphics card driver.
- Check the Driver app Uninstall box for this device. Then click Uninstall to take this action.
- Restart the computer.
If possible, a new graphics driver can automatically download and update Windows 10 which is not only compliant but also the most up-to-date one. You won’t run into the System Thread Exception Not Handled loop on Windows 10 or 8 here this way.
Solution 3: Update Drivers
Unfortunately, it may be that many more corrupt or corrupted device drivers lead to blue screen deaths are sometimes not part of a problem in the graphics card system. It’s hard to see which drivers are troublesome if you have just entered safe mode or experienced BSOD in relation to the atikmdag.sys system. So you’d better use Driver Booster to upgrade all of the drivers for you.
Driver Booster is also able to identify where the problems that trigger your Windows 10 to BSOD are and then automatically update the drivers for you, such as the graphics driver, sound card driver, etc.
- Download Driver Booster, install and run it on your computer.
- Click on Scan button. With the incompatible or corrupted drivers, Driver Booster will automatically check for your PC.
- Locate Display adapters to upgrade the driver of your video cards.
Since Windows 10 BSOD device thread exception not handled can be triggered in some way by a corrupted graphics driver, you now need to upgrade the display driver.
- You can also upgrade now to get Windows 10 enabled on all system drivers.
At the moment you’ve installed the up-to-date drivers for Windows 10, you’d notice the BSOD problem with system thread exception not handled disappeared and you can run your machine as usual.
Solution 4: Search for Corrupted Files
Windows 10 will use an embedded-in program– CHKDSK command lines, built for you to detect whether there are any defective files that can damage your PC’s regular work. Now that you are experiencing the system thread exception not handled, execute the command line to check if any compromised files are present on Windows 10.
- Type Command Prompt and right-click Run as administrator on the best-matched result.
- To execute this instruction, input CHKDSK C:/F / R in the Command Prompt window and then press Enter.
- For atikmdag.sys, Windows 10 will search whether there are any corrupted files that could turn your Computer to BSOD.
However, only some simple device issues can be found by this built-in testing method. You can read on for additional solutions.
Solution 5: Run SFC Command.
Some corrupted files lead to the system thread exception not covered by the BSOD error, as you have been reminded. If the built-in tool failed to detect can corrupted files causing this BDOS problem. The System File Checker (SFC) can help you understand why on Windows 10 it should be fixed.
- Run it as Administrator and Prompt Open Orders.
- Enter the command SFC /scannow and press Enter.
Then Windows 10 begins searching the device so that you are able to identify any damaged files.
- Ctl reset. Reset Screen.
If it had issue files, the cached copy that was stored in directories on Windows 10 would have been replaced by the SFC. There is also no need to worry about files that do not present a System Thread Exception not Handled trouble.
Solution 6: Uninstall some software from third parties
Some virus programs are said to cause significant harm to your Computer. But, on Windows 10, you have no need to remember it. It is also important that you uninstall or delete the antivirus software and see if it does not manage the PC BSOD.
In most instances, the device or application may be either uninstalled in the software management or in PC settings.
The main purpose of this BSOD Framework Thread Exception Not Handled problem is to detect and delete incompatible drivers or corrupted files from the supposed solutions. Apart from these two aspects, if your PC BSOD continues, you can need to roll back to Windows 7 or 8 to check whether Windows 10 bugs contain the problem.
